Worm Gear Small Series
ELECON gear units will operate safety provided that they are selected, installed, used and maintained property.
| Underdriven | SNU-U |
| Overdriven | SNU-O |
| Verticle output shaft up/down | SNU-V |
| Hollow output shaft | SNU-SM |
| Sizes | 1 5/8" to 3.54" |
| Ratio | Min. 5 : 1 to Max 70 : 1 |
| Power Capacity | 12.5 kW |
Worm Gear Medium Series
ELECON gear units will operate safety provided that they are selected, installed, used and maintained property.
| Underdriven | SNU-U |
| Overdriven | SNU-O |
| Verticle output shaft up/down | SNU-V |
| Hollow output shaft | SNU-SM |
| Sizes | 4" to 10.5" |
| Ratio | Min. 5 : 1 to Max 70 : 1 |
| Power Capacity | 139 kW |
Worm Gear Higher Series
ELECON gear units will operate safety provided that they are selected, installed, used and maintained property.
| Underdriven | SFU |
| Overdriven | SFO |
| Verticle output shaft up/down | SFV |
| Hollow output shaft | SSM |
| Sizes | 10" to 17" |
| Ratio | Min. 5 : 1 to Max 70 : 1 |
| Power Capacity | 350 kW |
SNU - Modular Universal Mounting
| Underdriven | SNU-U |
| Overdriven | SNU-O |
| Verticle output shaft up/down | SNU-V |
| Hollow output shaft | SNU-SM |
| Sizes | 1 5/8, 13, 2, 21, 3, 31, 4, 5, 6, 7, 8, 9, 10.5 |
| Ratio | Min. 5 : 1 to Max 70 : 1 |
| Power Capacity | 139 kW |
ER Series
General Purpose usage to Double Reduction gears, Geared Motors, Cooling Tower gears & Stirrer units.
| Sizes | 4″ to 17″ |
| Rating | 1.1 to 350 kW |
| Mounting and change of Shaft Handling | Achieved easily and quickly without dismantling the gear case. |
| Applications | Heavy duty stirrer gear units Cooling Tower gear units Double Reduction: Worm-worm, Helical-worm, Worm Geared motors. |
Double Reduction Gear (Worm)
The Elecon double reduction worm gear box gives a minimum of 75:1 and a maximum of 4900:1 ratio to meet the requirement of slow moving machinery. It is available in under-driven, over-driven and vertical assembled conditions.
| Underdriven | SNU-UD / SFUD |
| Overdriven | SNU-OD / SFOD |
| Verticle output shaft | SNU-VD / SFVD ( UP/down ) |
| Hollow output shaft | SNU-SMD /SSMD |
| Sizes | 13/30, 21 /40, 21 /50, 3/60, 3/70, 4/80, 4/90, 5/105 , 5/120 , 6/140 , 7/170 |
| Ratio | Min. 75 : 1 to Max 4900 : 1 |
| Power Capacity | 50 kW |
Heavy Duty Stirrer Unit
Heavy Duty Stirrer unit incorporates an extended bearing housing to accommodate a larger bottom bearing and increased shaft size, there by enhancing the unit capacity to absorb the high bending loads imposed during stirrer applications. CVDM
| Model & Type | SNU-CVDM |
| Sizes | 4, 5, 6 7, 8, 9, 10.5 |
| Model & Type | |
| Sizes | 10, 12, 14, 17 |
| Ratio | Min. 5 : 1 to Max. 70 : 1 |
| Power Capacity | 350 kW |
| Applications | Large capacity chemical mixing |